The Autorefractor Shin Nippon Accuref 8001 uses the fogging system for the relaxation of accommodation. It tends to allow instrumental myopia for the person who doesn’t accommodate well. This is because the patient is looking at the inside target unnaturally.
The Autorefractor Shin Nippon Accuref 8001 takes away this weak point by using the open view window. It allows a more natural measurement. Additionally, the ideal refractive measurement can be achieved since the far point is measured while the person is looking at the target in distance.
OVERVIEW
Wide Measurement Range
Wide Measurement range of Sph -25.00D to +25.00D, Cyl - 10.00D to +10.00D
2.3 mm Minimum Pupil Diameter & 3 steps Target Light Adjuster
Allows you to measure much smaller pupils than conventional units and 3 steps Target Light Adjuster ensures accurate results.
Clear 5.6 inch LCD monitor
LCD color monitor produces superb colorful display of the icons for easier identification to select your desired choices for measurement.
Measurement Screen
(1) Eye Selection Indication
(2) Auto mode
(3) Increment of
(4) Measurement Value Vertex Distance
(5) Cylindrical Mark
(6) Spherical value
(7) Cylindrical value
(8) Axis angle
Data Screen Function
Measure data can be seen on the monitor without printing.
 3 Steps Monitor Angle
Monitor angle can be tilted in 3 steps that allows comfortable operation for both standing and sitting positions.
Choice of the format of printout
Format of the print out, ALL, ECONO and OFF, can be set on the mode selection.
 Quick Printer with Automatic Cutter
Printing paper is automatically cut when it is released.
Auto Start Function
Auto Start Function allows measuring automatically when alignment meets measurement requirements.
Quick Measurement Function
Quick Measurement Function realizes 1-10 times continuous measurements by pushing the measurement button once.
Measurement Function
ACCURF 8001 has the function to measure the IOL (Intraocular Lens) implanted eye.
RC-232C Setting Function
With this function, you can send the measurement data to an external computer through an interface. The data is sent using ASCII CODE.
Output Terminal
This terminal outputs an NTSC video terminal. If you connect an external monitor, you can observe the same image that appears on the internal monitor screen of ACCUREF 8001 simultaneously.
Power Saving Function
The switchover time can be selected on the menu screen.
SPECIFICATIONS
| REFRACTIVE MEASURING RANGE |
Sph |
-25 ~ 25D (0.12/0.25D step) |
| Cy |
0 ~ ± 10D (0.12/0.25D step) |
| Axis |
0 ~ 180° (1° step) |
| VERTEX DISTANCE |
0, 10, 12, 13.5, 15 mm |
| MINIMUM PUPIL DIAMETER |
φ2.3 mm |
| PD MEASUREMENT |
Measurement range 85 mm (1mm step) |
| PRINTER |
Thermal line printer with automatic cutter (paper width 57mm) |
| INTERNAL MONITOR |
5.6 Inch LCD Monitor (color) |
| SHIFTING RANGE FOR SLIDING BODY |
back/forth ± 17mm right/left ± 43mm up/down ± 17mm |
| VERTICAL ADJ. RANGE FOR CHIN-REST |
± 30 mm |
| DIMENSIONS |
(W) 240mm (D) 418 mm (H) 438 mm |
| WEIGHT |
Approx. 15 kg |
| DATE OUTPUT |
RS-232C Interface Video Terminal |
| POWER SOURCE |
100 ~ 240V 50/60Hz |
| CONSUMPTION |
80 VA |
| POWER SAVING FUNCTION |
OFF, 3, 5, 10 min. (switchable) |
| STANDARD ACCESSORIES |
Model Eye, Power Code, Printing Paper, Fuse, Chin Rest Paper, Chin Rest Paper Pin, Dust Cover |
Design and specifications are subject to change without notice.
|
Autorefractor 
